Asphalt is commonly used in driveway and parking lot construction. However, over time, it can develop cracks that not only impair the appearance of the surface but can be dangerous to vehicles and pedestrians. An effective strategy for repairing such cracks is to use asphalt crack filler. However, proper application of filler is crucial for accomplishing the desired result. In this article, we will explore how to properly apply asphalt crack filler to make your driveways and parking lots look new again. Curious to learn more about the topic? We’ve got you covered! crack filler for asphalt, explore the external resource for more in-depth information and fresh perspectives.
Clean The Surface
The first step before applying any sealant or filler is to clean the surface. Remove any visible debris, oil stains, and vegetation from the surface with the help of a wire brush and a broom. To ensure that the surface dust doesn’t get stuck in the cracks, use a blower or a leaf blower to clean the debris.
Choose The Right Crack Filler
There are two types of crack filler: cold-pour and hot-pour. Cold-pour filler is available in cans, buckets, or tubes and can be poured into cracks using a spout or a nozzle. On the other hand, hot-pour filler is melted and applied using a specially designed machine. It’s essential to choose the right type of crack filler for your driveway or parking lot surface. For larger cracks, hot-pour filler is recommended as it can be more effective and durable, while cold-pour filler is perfect for smaller and narrow cracks. Careful selection of the right filler type is necessary to ensure the longevity of the repair.
Apply The Crack Filler
After cleaning the surface and choosing the right filler type, it’s time to apply the crack filler. Begin by cutting the tip of the spout or nozzle to the right size, which should match the crack size and width. Slowly squeeze the bottle or can and move the tip of the spout over the crack, filling the crack with the filler as you go. Once the crack is appropriately filled, use a putty knife or a scraper to smoothen the surface, and be sure that the filler is level with the surrounding surface. Don’t apply too much filler, as it can crack or sag over time.
Allow The Filler To Dry
Depending on the temperature and humidity of your area, crack filler can take a few hours or up to a day to dry completely. Before applying a sealer coat or allowing traffic over the repaired surface, make sure that the filler is entirely dry. Avoid walking or driving over the repaired cracks until the filler has cured, or it might leave tire tracks and ruin the surface.
Apply A Sealer Coat (Optional)
If you want to protect your newly repaired surface, it’s recommended to apply a sealer coat over the surface. Sealers can help prevent water damage, reduce UV rays penetration, and slow down surface wear and tear. You can apply the sealer after the filler has dried by using a squeegee to spread it evenly over the surface. Depending on the sealer type and the surface condition, one or two coats of sealer are enough to protect the surface for several years. Delve further into the topic with this thoughtfully picked external site. asphalt crack filler, learn more about the topic and uncover new perspectives to broaden your knowledge.
Conclusion
Proper application of asphalt crack filler can restore the beauty of your surface, prevent further damage, and prolong the surface’s life. Ensure the surface is clean and prepared, select the right crack filler type, fill the cracks correctly, and let the filler dry entirely before applying a sealer coat. If you follow these simple steps, you can be sure that your driveway and parking lot are in good shape for many years to come.
Review the related posts below for more information on the topic:
Dive into this impartial analysis